EXHAUST MANIFOLD COMPONENTS

ILLUSTRATION

B0075NRC01
*A for Full Cover Type *B w/ No. 2 Engine Under Cover
*1 NO. 2 ENGINE UNDER COVER *2 FRONT SUSPENSION MEMBER BRACE
*3 FRONT CENTER FLOOR BRACE *4 FRONT CENTER FLOOR COVER LH
*5 FRONT CENTER FLOOR COVER RH - -
B0077OL N*m (kgf*cm, ft.*lbf): Specified torque - -

ILLUSTRATION

B0074VPC02
*1 FRONT EXHAUST PIPE ASSEMBLY (TWC: Rear Catalyst) *2 HEATED OXYGEN SENSOR (for Bank 1)
*3 HEATED OXYGEN SENSOR (for Bank 2) *4 GASKET
*5 COMPRESSION SPRING - -
B0077OL N*m (kgf*cm, ft.*lbf): Specified torque * For use with SST
Non-reusable part - -

ILLUSTRATION

B0076RSC02
*1 EXHAUST MANIFOLD SUB-ASSEMBLY LH (TWC: Front Catalyst) *2 EXHAUST MANIFOLD SUB-ASSEMBLY RH (TWC: Front Catalyst)
*3 NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY *4 NO. 2 ENGINE OIL LEVEL DIPSTICK GUIDE
*5 ENGINE OIL LEVEL DIPSTICK *6 NO. 1 EXHAUST MANIFOLD HEAT INSULATOR
*7 GASKET *8 O-RING
B0077OL N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part