CYLINDER HEAD COMPONENTS
ILLUSTRATION
| *1 | INTAKE VALVE | *2 | INTAKE VALVE GUIDE BUSH |
| *3 | INTAKE VALVE STEM OIL SEAL | *4 | INNER COMPRESSION SPRING |
| *5 | EXHAUST VALVE | *6 | EXHAUST VALVE GUIDE BUSH |
| *7 | EXHAUST VALVE STEM OIL SEAL | *8 | SPARK PLUG TUBE |
| *9 | VALVE SPRING SEAT | *10 | NO. 1 STRAIGHT SCREW PLUG |
| *11 | NO. 2 STRAIGHT SCREW PLUG | *12 | NO. 3 STRAIGHT SCREW PLUG |
| *13 | VALVE SPRING RETAINER LOCK | *14 | VALVE SPRING RETAINER |
| *15 | WATER HOLE GASKET | *16 | CYLINDER HEAD SCREW PLUG GASKET |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
Adhesive 1324 | ★ | Precoated part |
ILLUSTRATION
| *1 | RING PIN | *2 | STRAIGHT PIN |
| *3 | STUD BOLT | *4 | UNION |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | * | For use with Union Nut Wrench |
| ● | Non-reusable part | |
Adhesive 1324 |
| ★ | Precoated part | - | - |