FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL TIMING CHAIN COVER OIL SEAL


    1. Apply MP grease to the lip of a new timing chain cover oil seal.

      Note


      • Keep the lip of the timing chain cover oil seal free from foreign matter.

      • Do not allow MP grease to contact the dust seal.

    2. B0073KXC04
      *a Standard Depth

      Using SST and a hammer, tap in the timing chain cover oil seal until its surface is flush with the timing chain cover edge.

      SST
      09636-20010
      Standard Depth
      -0.75 to -1.45 mm (-0.0295 to -0.0571 in.) (From the edge of the timing chain cover assembly)

      Note


      • Do not tap in the timing chain cover oil seal at an angle.

      • Keep the lip of the timing chain cover oil seal free from foreign matter.

      • Wipe off any excess MP grease from the crankshaft.

  2. INSTALL CRANKSHAFT PULLEY ASSEMBLY

    Click here

  3. INSTALL RADIATOR ASSEMBLY

    Click here

  4. INSTALL V-RIBBED BELT

    Click here

  5. INSPECT FOR ENGINE OIL LEAK

    Click here