CYLINDER HEAD GASKET COMPONENTS
ILLUSTRATION
| *1 | CYLINDER HEAD COVER SUB-ASSEMBLY | *2 | ENGINE OIL LEVEL DIPSTICK GUIDE |
| *3 | NO. 1 TURBO WATER BY-PASS HOSE | *4 | IGNITION COIL ASSEMBLY |
| *5 | NO. 1 TURBO WATER PIPE | *6 | NO. 3 VENTILATION HOSE |
| *7 | NO. 3 TURBO WATER BY-PASS HOSE | *8 | NO. 2 TURBO WATER BY-PASS HOSE |
| *9 | NO. 4 TURBO WATER BY-PASS HOSE | *10 | CAMSHAFT POSITION SENSOR (for Exhaust Side) |
| *11 | ENGINE OIL LEVEL DIPSTICK | *12 | O-RING |
| *13 | GASKET | *14 | CAMSHAFT POSITION SENSOR (for Intake Side) |
| *15 | CAMSHAFT BEARING CAP OIL HOLE GASKET | *16 | CYLINDER HEAD COVER GASKET |
| *17 | NO. 2 CYLINDER HEAD COVER GASKET | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | AIR CLEANER BRACKET | *2 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY |
| *3 | CRANKSHAFT POSITION SENSOR | *4 | CRANKSHAFT PULLEY ASSEMBLY |
| *5 | IDLER PULLEY SUB-ASSEMBLY | *6 | TIMING CHAIN COVER ASSEMBLY |
| *7 | TIMING CHAIN COVER OIL SEAL | *8 | V-RIBBED BELT TENSIONER ASSEMBLY |
| *9 | WATER OUTLET SUB-ASSEMBLY | *10 | CRANKSHAFT PULLEY SET BOLT |
| *11 | O-RING | *12 | GASKET |
| *13 | NO. 6 WATER BY-PASS HOSE | *14 | OIL PUMP GASKET |
| *15 | NO. 2 OIL STRAINER GASKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
 |
MP grease |  |
Adhesive 1324 |
| ★ | Precoated part |  |
Do not apply lubricants to the threaded parts |
ILLUSTRATION
| *1 | CAMSHAFT HOUSING SUB-ASSEMBLY | *2 | CAMSHAFT TIMING EXHAUST GEAR ASSEMBLY |
| *3 | CAMSHAFT TIMING GEAR ASSEMBLY | *4 | CHAIN SUB-ASSEMBLY |
| *5 | CHAIN TENSIONER SLIPPER | *6 | NO. 1 CHAIN TENSIONER ASSEMBLY |
| *7 | NO. 1 CHAIN VIBRATION DAMPER | *8 | TIMING CHAIN GUIDE |
| *9 | VACUUM PUMP ASSEMBLY | *10 | CAMSHAFT TIMING GEAR BOLT |
| *11 | NO. 2 O-RING | *12 | NO. 3 O-RING |
| *13 | GASKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| *T1 | Type A: 120 N*m (1224 kgf*cm, 89 ft.*lbf) Type B: 95 N*m (969 kgf*cm, 70 ft.*lbf) |
- | - |
ILLUSTRATION
| *1 | NO. 3 WATER BY-PASS PIPE | *2 | CYLINDER HEAD SUB-ASSEMBLY |
| *3 | CYLINDER HEAD GASKET | *4 | CYLINDER HEAD SET BOLT |
| *5 | VALVE STEM CAP | *6 | VALVE LASH ADJUSTER ASSEMBLY |
| *7 | NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY | *8 | PLATE WASHER |
| *9 | GASKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| *T1 | 1st: 85 (867, 63) 2nd: Turn 90° 3rd: Turn 90° |
- | - |