ENGINE COOLANT TEMPERATURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE FUEL PRESSURE SENSOR

    Click here

  2. DISCONNECT WATER BY-PASS HOSE


    1. B00739O

      Slide the clip and disconnect the water by-pass hose from the rear water by-pass joint.

  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. Disconnect the engine coolant temperature sensor connector.

    2. B007344

      Remove the engine coolant temperature sensor from the rear water by-pass joint.

      Note

      If the engine coolant temperature sensor has been struck or dropped, replace it.

    3. Remove the gasket from the engine coolant temperature sensor.