MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL NO. 2 TURBO PRESSURE SENSOR

   
   

   1. Connect the vacuum hose to the No. 2 turbo pressure sensor and slide the hose clamp to secure it.

   2. Install the No. 2 turbo pressure sensor to the intake manifold with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      If the No. 2 turbo pressure sensor has been struck or dropped, replace it.

   3. Connect the vacuum hose to intake manifold and slide the hose clamp to secure it.

   4. Engage the clamp.

   5. Connect the No. 2 turbo pressure sensor connector.

2. INSTALL NO. 1 TURBO PRESSURE SENSOR

   
   

   1. Install the No. 1 turbo pressure sensor to the intake manifold with the bolt.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

      Note

      If the No. 1 turbo pressure sensor has been struck or dropped, replace it.

   2. Connect the No. 1 turbo pressure sensor connector.