MANIFOLD ABSOLUTE PRESSURE SENSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 TURBO PRESSURE SENSOR


    1. A01R6US

      Disconnect the No. 1 turbo pressure sensor connector.

    2. Remove the bolt and No. 1 turbo pressure sensor from the intake manifold.

      Note

      If the No. 1 turbo pressure sensor has been struck or dropped, replace it.

  2. REMOVE NO. 2 TURBO PRESSURE SENSOR


    1. A01R7IW

      Disconnect the No. 2 turbo pressure sensor connector.

    2. Disengage the clamp.

    3. Slide the hose clamp and disconnect the vacuum hose from the intake manifold.

    4. A01R5GV

      Remove the bolt and No. 2 turbo pressure sensor from the intake manifold.

      Note

      If the No. 2 turbo pressure sensor has been struck or dropped, replace it.

    5. A01R4HW

      Slide the hose clamp and disconnect the vacuum hose from the No. 2 turbo pressure sensor.