ACCELERATOR PEDAL REMOVAL

PROCEDURE


  1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • This accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.


    1. B0076S0C01
      *A for LHD
      *B for RHD

      Disconnect the accelerator pedal sensor assembly connector.

    2. Remove the 2 nuts and accelerator pedal sensor assembly.

      Note

      If the accelerator pedal sensor assembly has been struck or dropped, replace it.

    3. Separate the rod of the accelerator pedal sensor assembly from the accelerator pedal assembly to remove the accelerator pedal sensor assembly.

  2. REMOVE ACCELERATOR PEDAL PAD


    1. B007353

      Disengage the 2 claws and remove the accelerator pedal pad.

  3. REMOVE ACCELERATOR PEDAL ASSEMBLY


    1. B00748A

      Remove the 2 bolts and accelerator pedal assembly.