SFI SYSTEM(w/ Canister Pump Module) PARTS LOCATION
ILLUSTRATION
| *1 | AIR FUEL RATIO SENSOR (Bank 1 Sensor 1) | *2 | CANISTER |
| *3 | FUEL PUMP (for Low Pressure Side) | *4 | HEATED OXYGEN SENSOR (Bank 1 Sensor 2) |
| *5 | SEMICONDUCTOR PWR INTEGRATION ECU | *6 | PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
| *7 | PURGE VSV | *8 | NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY |
| *9 | ECM | *10 | TCM |
| *11 | AIR FUEL RATIO SENSOR (Bank 2 Sensor 1) | *12 | HEATED OXYGEN SENSOR (Bank 2 Sensor 2) |
| *13 | FUEL PUMP CONTROL ECU | *14 | NO. 2 ENGINE ROOM RELAY BLOCK AND NO. 2 JUNCTION BLOCK ASSEMBLY |
ILLUSTRATION
| *1 | CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Camshaft of Bank 1) | *2 | CRANKSHAFT POSITION SENSOR |
| *3 | FUEL INJECTOR ASSEMBLY (for Direct Injection) | *4 | FUEL PRESSURE SENSOR |
| *5 | MASS AIR FLOW METER SUB-ASSEMBLY | *6 | THROTTLE BODY WITH MOTOR ASSEMBLY |
| *7 | FUEL INJECTOR ASSEMBLY (for Port Injection) | *8 | INJECTOR DRIVER (EDU) |
| *9 | CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Camshaft of Bank 2) | *10 | CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Camshaft of Bank 1) |
| *11 | CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Camshaft of Bank 2) | *12 | FUEL RELIEF VALVE ASSEMBLY |
ILLUSTRATION
| *1 | ENGINE COOLANT TEMPERATURE SENSOR | *2 | FUEL PUMP (for High Pressure Side) |
| *3 | KNOCK CONTROL SENSOR (for Bank 1) | *4 | KNOCK CONTROL SENSOR (for Bank 2) |
| *5 | IGNITION COIL ASSEMBLY | *6 | VVT SENSOR (for Intake Camshaft of Bank 1) |
| *7 | VVT SENSOR (for Exhaust Camshaft of Bank 1) | *8 | VVT SENSOR (for Intake Camshaft of Bank 2) |
| *9 | VVT SENSOR (for Exhaust Camshaft of Bank 2) | - | - |
ILLUSTRATION
| *1 | ACCELERATOR PEDAL SENSOR ASSEMBLY | *2 | STOP LIGHT SWITCH ASSEMBLY |
| *3 | DLC3 | *4 | COMBINATION METER ASSEMBLY |