RADIO ANTENNA CORD INSTALLATION

PROCEDURE

1. INSTALL NO. 5 ANTENNA CORD SUB-ASSEMBLY

   
   

   1. Engage each clamp.

   2. Connect the 2 connectors to install the No. 5 antenna cord sub-assembly.

2. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY

   Click here

3. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY

   
   

   1. Engage each clamp.

   2. w/o Digital Audio Broadcasting Antenna or Television Antenna:

      
      

      1. Install the 2 bolts.

   3. w/ Digital Audio Broadcasting Antenna or Television Antenna:

      
      

      1. Install the 3 bolts.

   4. Connect each connector to install the No. 2 antenna cord sub-assembly.

   5. 

      Install the floor carpet to its original position as shown in the illustration.

   6. Engage the 2 guides.

   7. Install the 4 clips.

4. INSTALL NO. 1 ROOM PARTITION COVER

   Tech Tips

   Use the same procedure as for the No. 2 room partition cover.

   Click here

5. INSTALL REAR SEAT SUB FLOOR PANEL

   Click here

6. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

   Click here

7. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM COVER

   Click here

8. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

   Click here

9. INSTALL FRONT DOOR SCUFF PLATE LH

   Click here

10. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

11. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

12. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

13. INSTALL REAR SEAT ASSEMBLY

    Click here

14. INSTALL FRONT SEAT ASSEMBLY LH

    Click here

15. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

16. INSTALL ANTENNA CORD SUB-ASSEMBLY

    
    

    1. Engage each clamp.

    2. Connect each connector to install the antenna cord sub-assembly.

17. INSTALL NO. 1 CONSOLE BOX DUCT

    Click here

18. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

19. INSTALL REAR CONSOLE BOX ASSEMBLY

    Click here

20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here