STEREO COMPONENT AMPLIFIER INSTALLATION

PROCEDURE

1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY

2. INSTALL NO. 2 AMPLIFIER BRACKET

   
   

   1. Install the No. 2 amplifier bracket with the 2 screws.

3. INSTALL NO. 1 AMPLIFIER BRACKET

   
   

   1. Install the No. 1 amplifier bracket with the 2 screws.

4. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET

   
   

   1. Engage the clamp.

   2. Connect each connector.

   3. 

      Push the stereo component amplifier assembly with bracket in the direction indicated by the arrow (1) shown in the illustration.

   4. Push the stereo component amplifier assembly with bracket in the direction indicated by the arrow (2) shown in the illustration.

   5. Install the stereo component amplifier assembly with bracket with the 2 nuts.

5. INSTALL LUGGAGE COMPARTMENT TRIM COVER RH

   Click here

6. INSTALL DECK SIDE TRIM BOX RH

   w/ Deck Side Trim Box: Click here

7. INSTALL ROPE HOOK ASSEMBLY

   Click here

8. INSTALL FRONT UPPER LUGGAGE COMPARTMENT TRIM COVER

   Click here

9. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

   Click here

10. INSTALL NO. 1 ROOM PARTITION COVER

    Tech Tips

    Use the same procedure as for the No. 2 room partition cover.

    Click here

11. INSTALL REAR SEAT SUB FLOOR PANEL

    Click here

12. INSTALL REAR SEAT ASSEMBLY

    Click here

13. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER

    Click here

14. INSTALL REAR LUGGAGE COMPARTMENT TRIM COVER

    Click here

15. INSTALL SPARE WHEEL COVER TRAY

    Click here

16. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM COVER

    Click here

17. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER RH

    Click here

18. INSTALL LUGGAGE COMPARTMENT DOOR COVER

    Click here