NOISE FILTER INSTALLATION

PROCEDURE


  1. INSTALL RADIO SETTING CONDENSER (for Window Defogger)


    1. B0077ER

      Engage the claw to install a new terminal cover to the wire harness.

      Note


      • Make sure to hold the crimping side of the terminal when installing the wire harness to the terminal cover.

      • Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

      • Do not use excessive force when inserting the wire harness into the terminal cover.

      • If the terminal cover has been deformed during installation, replace the terminal and terminal cover with new ones.

    2. B0072ZF

      Engage the 3 claws to install the new terminal cover with wire harness to a new condenser.

      Note


      • Do not use excessive force when inserting the terminal cover into the condenser.

      • If the terminal cover has been deformed during installation, replace the terminal, terminal cover and condenser with new ones.

    3. Engage the clamp to temporarily install a new radio setting condenser with wire harness.

    4. Install the new radio setting condenser with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  2. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH (for Window Defogger)

    Click here

  3. INSTALL RADIO SETTING CONDENSER (for High Mounted Stop Light)


    1. B0075IE

      Engage the claw to install a new terminal cover to the wire harness.

      Note


      • Make sure to hold the crimping side of the terminal when installing the wire harness to the terminal cover.

      • Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

      • Do not use excessive force when inserting the wire harness into the terminal cover.

      • If the terminal cover has been deformed during installation, replace the terminal and terminal cover with new ones.

    2. B0073OA

      Engage the 6 claws to install 2 new terminal covers with wire harness to a new condenser.

      Note


      • Do not use excessive force when inserting the terminal covers into the condenser.

      • If a terminal cover has been deformed during installation, replace the terminal, terminal covers and condenser with new ones.

    3. B0075TB

      Insert the cover as shown in the illustration and engage the claw.

    4. Engage the clamp to temporarily install the new radio setting condenser with wire harness.

    5. Install the new radio setting condenser with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

    Click here

  5. INSTALL REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  6. CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Click here

  7. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  8. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here

  9. INSTALL FRONT DOOR SCUFF PLATE LH

    Click here