STEERING PAD SWITCH(w/ Lane Departure Alert System) REMOVAL

PROCEDURE


  1. REMOVE HORN BUTTON ASSEMBLY

    Click here

  2. REMOVE CRUISE CONTROL MAIN SWITCH

    Click here

  3. REMOVE STEERING PAD SWITCH ASSEMBLY


    1. B0077HC

      Separate the wire harness from the 2 guides of the steering shake damper.

    2. B0073SE

      Disconnect the connector from the spiral cable with sensor sub-assembly.

    3. B0075QZ

      Remove the 2 screws.

    4. Disengage the 2 claws and 2 pins to remove the steering pad switch assembly from the steering wheel sub-assembly.