NAVIGATION SYSTEM PRECAUTION


  1. PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • After the engine switch is turned off, the radio receiver assembly records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 85 seconds before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the terminal is reconnected.

      System Name See Procedure
      Lane Departure Alert System (w/ Steering Control)

      Click here

      Stop and Start System
      Variable Gear Ratio Steering System
      Parking Assist Monitor System (w/o Parallel Parking Assist Function)
      Pre-collision System
      Air Conditioning System

  2. Note


    • When replacing the radio receiver assembly or navigation ECU, always replace it with a new one. If a radio receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:


      • A communication malfunction DTC may be stored.

      • The radio receiver assembly or navigation ECU may not operate normally.

    • When replacing the telematics transceiver, be sure to replace it with a new one (w/ Telematics Transceiver).

    • After replacing the radio receiver assembly, if the "New software is not compatible with the system. Contact your dealer." on-screen message is displayed on the multi-display assembly, update the software of the navigation ECU.

    • After replacing the navigation ECU, if the "New software is not compatible with the system. Contact your dealer." on-screen message is displayed on the multi-display assembly, update the software of the radio receiver assembly.

    PRECAUTION FOR NAVIGATION SYSTEM


    1. If any of the following parts are replaced, refer to Initialization in Repair Instruction (w/ Telematics Transceiver for G-BOOK).

      Click here


      • Navigation ECU

      • Telematics transceiver

  3. PRECAUTIONS FOR G-BOOK (w/ Telematics Transceiver for G-BOOK)


    1. The navigation ECU functions as the G-BOOK device and stores the G-BOOK ID.

      Note

      When replacing the navigation ECU or telematics transceiver, perform Vehicle Contract Setting.

      Click here

    2. Necessary data for the telematics system is stored in the navigation ECU.

      Note

      Download the necessary data after replacing the navigation ECU.

      Click here