NAME PLATE INSTALLATION

Tech Tips

When installing the emblem, rear body name plate and back door name plate, heat the vehicle body, emblem, rear body name plate and back door name plate using a heat light.

Standard
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Emblem 20 to 30°C (68 to 86°F)
Back Door Name Plate 20 to 30°C (68 to 86°F)
Rear Body Name Plate 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body, emblem, rear body name plate and back door name plate excessively.


  1. INSTALL SYMBOL EMBLEM

    A01EOSTE01
    Text in Illustration
    *1 Boss

    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new emblem.


      1. Using a heat light, heat the vehicle body and a new emblem.

      2. Remove the peeling paper from the face of the emblem.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Align the boss positions and install the emblem.

        Tech Tips

        Press the emblem firmly to install it.

  2. INSTALL BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new back door name plate.


      1. Using a heat light, heat the vehicle body and a new back door name plate.

      2. Remove the peeling paper from the face of the back door name plate.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the back door name plate in the position shown in the illustration.

        Tech Tips

        Press the back door name plate firmly to install it.

        A01EPHNE01
        Text in Illustration
        *a 22 mm (0.866 in.) *b 257.5 mm (10.1 in.)

  3. INSTALL REAR NO. 3 BODY NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new rear body name plate.


      1. Using a heat light, heat the vehicle body and a new rear body name plate.

      2. Remove the peeling paper from the face of the rear body name plate.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the rear body name plate in the position shown in the illustration.

        Tech Tips

        Press the rear body name plate firmly to install it.

        A01ERHOE01
        Text in Illustration
        *a 23.5 mm (0.925 in.) *b 256 mm (10.0 in.)