BACK DOOR GARNISH (for Upper Side) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE

    A01EQUO

    1. Attach the 3 clips to install the garnish.

    2. Install the 2 nuts.

  2. INSTALL BACK DOOR GARNISH RETAINER SUB-ASSEMBLY


    1. A01ESOO

      Connect the connector.

    2. Using a T30 "TORX" socket wrench, attach the 2 clips and install the garnish with the 2 screws.

  3. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)


    1. A01ENY5

      Attach the 2 clips to install the power back door sensor assembly LH.

    2. Using a T25 "TORX" wrench, install the 6 screws.

    3. A01ERB7

      Connect the connector.

  4. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

    Tech Tips

    Use the same procedures described for the LH side.

  5. INSTALL LOWER BACK DOOR STOPPER CUSHION


    1. A01ERBLE01

      Install the 2 back door stopper cushions with the 4 bolts.