CIGARETTE LIGHTER REMOVAL

Tech Tips


  • Use the same procedure for LHD and RHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A01EO0Q

      Detach the 8 claws.

    2. Disconnect the connector and remove the panel pad.

  2. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH


    1. A01ER40

      Remove the clip.

    2. Detach the clip and remove the cover.

  3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH


    1. A01EP7O

      Detach the 9 claws and remove the panel pad.

  4. REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH


    1. A01EO0O

      Detach the clip and remove the cover.

  5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01ENTE

      Twist the shift lever knob in the direction indicated by the arrow and remove it.

  6. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01EQSF

      Detach the 8 claws.

    2. Disconnect the connectors and remove the panel.

  7. REMOVE CIGARETTE LIGHTER KNOB AND ELEMENT ASSEMBLY

  8. REMOVE CIGARETTE LIGHTER ASSEMBLY


    1. A01EQ95

      Remove the 4 screws.

    2. A01ERODE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the claw and remove the cigarette lighter.

      Tech Tips

      Tape the screwdriver tip before use.

    3. A01EPML

      Detach the 2 claws and remove the cigarette lighter retainer.

  9. REMOVE BULB


    1. A01ER6X

      Remove the socket as shown in the illustration.

    2. Remove the bulb from the socket.