REAR POWER OUTLET SOCKET INSTALLATION


  1. INSTALL POWER OUTLET SOCKET (for Type B)


    1. Attach the 2 claws to install the power outlet socket.

  2. INSTALL POWER OUTLET SOCKET BEZEL (for Type B)


    1. Attach the 4 claws to install the power outlet bezel.

  3. INSTALL POWER OUTLET SOCKET COVER NO.2 (for Type A)


    1. Engage the 2 claws and install the power outlet socket cover.

  4. INSTALL POWER OUTLET SOCKET ASSEMBLY (for Type A)


    1. Engage the claw and install the power outlet socket assembly.

    2. Engage the 4 claws and install the power outlet socket bezel.

  5. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

    A01ERFB

    Tech Tips

    When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. Connect the thermistor connector.

    2. Attach the 19 clips and 2 claws to install the quarter trim panel.

    3. Install the clip.

      A01ENWJ
    4. A01EQO3E02

      Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.

    5. A01EOE1

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    6. A01ESN6

      Attach the 3 claws to install the cover.

  6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    A01EQA6

    1. Attach the 6 clips and 4 claws to install the support plate.

  7. INSTALL REAR DOOR SCUFF PLATE LH

    A01EN6Q

    1. w/o Illumination Type Front Door Scuff Plate:


      1. Attach the 3 claws and 4 clips to install the scuff plate.

      2. Install the screw.

    2. A01ERAD

      w/ Illumination Type Front Door Scuff Plate:


      1. Attach the 3 claws and 4 clips to install the scuff plate.

      2. Install the screw.

  8. INSTALL REAR STEP COVER

    Tech Tips

    Use the same procedure to install the step cover on the other side.


    1. A01EQ9D

      w/o Illumination Type Front Door Scuff Plate:

      Attach the 2 claws to install the step cover.

    2. A01EQ94

      w/ Illumination Type Front Door Scuff Plate:

      Attach the 4 claws to install the step cover.

  9. INSTALL REAR NO. 2 SEAT ASSEMBLY

    A01EO0XE01

    1. Temporarily install the seat with the 4 bolts.

      Note

      Be careful not to damage the vehicle body.

    2. Tighten the bolts in the order shown in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    3. Connect the connector.

  10. INSTALL REAR NO. 2 SEAT HINGE COVER LH

    A01EN8L

    1. Attach the 3 claws and 2 clips to install the cover.

  11. INSTALL REAR SEAT CUSHION HINGE COVER LH


    1. A01EN36

      Attach the 3 claws to install the cover.

    2. Return the seat to the upright position.

  12. INSTALL REAR NO. 2 SEAT HEADREST ASSEMBLY LH (for LH Side)