SMOG VENTILATION SENSOR INSTALLATION


  1. INSTALL SMOG VENTILATION SENSOR

    A01ERDR

    1. Install the sensor with the bolt.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    2. Connect the connector.

  2. INSTALL RADIATOR GRILLE ASSEMBLY


    1. w/ Wide View Front Monitor System:

      Connect the connector.

    2. Attach the 14 claws to install the radiator grille assembly.

    3. Attach the 4 clips to install the detached part of the upper radiator seal.

    4. Install the screw and 2 clips.

  3. INSTALL UPPER RADIATOR SUPPORT SEAL


    1. Install the upper radiator support seal with the 3 clips.

  4. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.

  5. INSTALL ENGINE ROOM SIDE COVER RH


    1. Install the engine room side cover RH with the 7 clips.