AIR CONDITIONING SYSTEM CHECK MODE PROCEDURE


  1. LIST OF OPERATION METHODS

    By operating each of the air conditioning control switches as shown in the diagram below, it is possible to enter the diagnostic check mode.

    Tech Tips


    • Use the same procedures for LHD and RHD vehicles.


    • The procedures listed below are for LHD vehicles.

    A01EQNBE06

  2. INDICATOR CHECK

    A01EPWWE03

    1. Turn the engine switch off.

    2. Turn the engine switch on (ACC) and wait at least 5 seconds.

    3. Turn the engine switch on (IG) while pressing the A/ C control panel "AUTO" switch and "Recirculation/ Fresh" switch simultaneously.

      Hold both switches until the indicator check screen appears.

      Text in Illustration
      *A for LHD
      *B for RHD
    4. A01EOJKE06

      Check that all indicators turn on and off 4 times in succession at 1 second intervals.

      Tech Tips


      • After the indicator check is completed, the system enters the DTC mode automatically.

      • Press the OFF switch to cancel the indicator check.