REAR CENTER SEAT INNER BELT ASSEMBLY (for 60/40 Split Seat Type 60 Side) INSTALLATION

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR SEAT INNER BELT ASSEMBLY

    A01ES5CE01

    1. Install the seat belt with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      The anchor part of the seat belt must not overlap the protruding part.

  2. INSTALL REAR NO. 1 SEAT RECLINING COVER RH

    A01ESFT

    1. Attach the 4 claws to install the cover.

    2. Install the 2 screws.

  3. INSTALL REAR NO. 1 SEAT ASSEMBLY LH


    1. Install the rear No. 1 seat assembly Click here.