REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Seat Type 40 Side) INSTALLATION

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

    A01EQ8KE01

    1. Install the belt with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding parts of the seat.

  2. INSTALL REAR NO. 1 SEAT RECLINING COVER LH

    A01EOW4

    1. Attach the 4 claws to install the cover.

    2. Install the 2 screws.

  3. INSTALL REAR NO. 1 SEAT ASSEMBLY RH


    1. Install the rear No. 1 seat assembly Click here.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.