REAR NO. 1 SEAT INNER BELT ASSEMBLY (for 60/40 Split Seat Type 40 Side) REMOVAL

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR NO. 1 SEAT ASSEMBLY RH


    1. Remove the rear No. 1 seat assembly Click here.

  3. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

    A01EOW4

    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  4. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

    A01ES20E01

    1. Remove the bolt and belt.