FRONT SEAT INNER BELT ASSEMBLY INSTALLATION


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. Install the front seat belt anchor plate.

    2. A01ENHVE01

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    3. Connect the 3 connectors and attach the clamps.

  2. INSTALL FRONT SEAT ASSEMBLY


    1. Install the front seat assembly Click here.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. CHECK SRS WARNING LIGHT

    Click here

  5. INSPECT FRONT SEAT ASSEMBLY


    1. Check the power seat operation Click here.

    2. w/ Seat Heater System:

      Check the seat heater operation.


      1. Turn the engine switch on (IG).

      2. Turn the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.

    3. w/ Climate Control Seat System:

      Check the climate control seat operation.


      1. When the climate control seat switch is turned on, check that the seat heater and blower operate based on the seat temperature.

      2. If the seat temperature increases as a result of the seat heater operation, check that the seat heater operation stops and the blower operation continues.

        Tech Tips

        Based on the cabin temperature, seat temperature, etc., the seat heater operation time varies.