FRONT SEAT INNER BELT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT SEAT ASSEMBLY


    1. Remove the front seat assembly Click here.

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    1. Disconnect the 3 connectors and detach the clamps.

    2. A01EPCP

      Remove the nut and front seat inner belt assembly.