REAR SEAT CUSHION HEATER (for 60/40 Split Seat Type 40 Side) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH


    1. Remove the rear No. 1 seat assembly Click here.

  2. REMOVE SEAT ADJUSTER BOLT COVER

    A01ER8K

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

    A01EN0M

    1. Remove the screw and release handle.

  4. REMOVE REAR NO. 1 SEAT RECLINING COVER RH

    A01ERR7E01

    1. Remove the 2 screws.

    2. Detach the 3 claws in the order shown in the illustration, and then remove the cover.

  5. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

    A01EOW4

    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  6. REMOVE UPPER SEAT TRACK RAIL COVER LH

    A01EOC6

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  7. REMOVE UPPER SEAT TRACK RAIL COVER RH

    A01EQVZ

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  8. REMOVE REAR NO. 2 SEAT LEG SIDE COVER


    1. A01ENX8

      Remove the 4 screws and detach the 3 claws.

    2. A01ENVE

      Remove the bolt that is securing the fold seat stopper band and remove the seat leg side cover together with the fold seat stopper band.

  9. REMOVE REAR NO. 2 SEAT PROTECTOR


    1. A01EQH9

      Detach the claw and remove the wire harness connector.

    2. w/ Seat Heater System:

      Detach the claw and remove the wire harness connector.

    3. A01EQUJ

      Using a clip remover, remove the clip.

    4. Detach the claw and remove the seat protector from the seat hinge.

    5. Detach the 2 claws, open the protector and remove the wire harness.

  10. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH

    A01EO5L

    1. Remove the 2 nuts and hinge.

  11. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH

    A01EQ0H

    1. Detach the wire harness clamp.

    2. w/ Seat Heater System:

      Detach the wire harness clamp.

    3. Remove the 2 nuts and hinge.

  12. REMOVE REAR SEAT COVER


    1. A01EO6N

      Detach the 12 claws.

    2. A01EN9A

      Remove the 3 screws.

    3. Detach the 2 claws and remove the cover.

  13. REMOVE REAR UNDER SIDE COVER LH

    A01ER6F

    1. Remove the 5 screws.

    2. Detach the clip and 2 claws, and remove the cover.

  14. REMOVE REAR SEAT UNDER TRAY COVER RH

    A01EO07

    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  15. REMOVE SEAT CUSHION COVER WITH PAD


    1. Detach the side airbag wire harness clamps.

    2. Remove the side airbag wire harness through the hole in the seat cushion.

    3. w/ Seat Heater System:


      1. A01EN8W

        Disconnect the 2 seat heater connectors.

      2. A01EREA

        Remove the seatback heater wire harness through the hole in the seat cushion.

    4. Remove the seat cushion cover with pad.

  16. REMOVE REAR SEPARATE TYPE SEAT CUSHION COVER


    1. A01EQI2E01

      Detach the 3 pieces of fastening tape.

    2. Remove the hog rings and cover.

  17. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY

    A01ENBS

    1. Cut off the tack pins which fasten the rear seat cushion heater assembly to the seat cushion cover, and then remove the rear seat cushion heater assembly from the seat cushion cover.