FRONT SEAT CUSHION HEATER (w/ Seat Heater System) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A01EN8KE02
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using a screwdriver, detach the 2 claws and remove the slide and vertical power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB

    A01EPMYE02
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT CUSHION SHIELD LH

    A01ENHA

    1. Remove the 2 screws.

    2. Disconnect the 2 rubber bands.

    3. A01EQ2T

      Disconnect the connector.

    4. A01EPVL

      Remove the 3 screws.

    5. Detach the 2 claws and remove the front seat cushion shield LH together with the front inner No. 1 seat cushion shield LH.

    6. A01EN8S

      Detach the 2 wire harness clamps.

    7. Disconnect the 2 connectors.

  5. REMOVE FRONT SEAT CUSHION SHIELD RH (for Front Passenger Side)

    A01ES9A

    1. Remove the 2 screws.

    2. Disconnect the 2 rubber bands.

    3. A01EO2Y

      Disconnect the connector.

    4. A01EOZD

      Remove the 3 screws.

    5. Detach the 2 claws and remove the front seat cushion shield RH together with the front inner No. 1 seat cushion shield RH.

    6. A01EOKG

      Disconnect the connector.

  6. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


    1. Disconnect the 3 connectors and detach the clamps.

    2. A01EPCP

      Remove the nut and front seat inner belt assembly.

  7. REMOVE FRONT INNER SEAT CUSHION SHIELD LH

    A01ERB2

    1. Remove the screw.

    2. Detach the 2 claws and clip, and then remove the front inner seat cushion shield LH.

  8. REMOVE FRONT POWER SEAT SWITCH LH

    A01EP70

    1. Disconnect the 2 connectors.

    2. Remove the 3 screws and front power seat switch LH.

  9. REMOVE FRONT POWER SEAT SWITCH RH (for Front Passenger Side)

    A01ERKN

    1. Disconnect the connector.

    2. Remove the 3 screws and front power seat switch RH.

  10. REMOVE SEAT CUSHION COVER WITH PAD


    1. A01ES22

      Using a clip remover, remove the 2 clips.

    2. w/o Climate Control Seat System:


      1. A01ENR5

        Disconnect the connector and detach the 2 wire harness clamps.

      2. A01EMXM

        Disconnect the connector and detach the wire harness clamp.

    3. w/ Climate Control Seat System:


      1. A01EQI6

        Disconnect the 2 connectors and detach the 4 wire harness clamps.

      2. A01EQFM

        Detach the wire harness clamp.

    4. for Driver Side:


      1. Detach the hooks.

        A01ES3I
      2. A01EO02

        Detach the front part of the front separate type seat cushion cover hooks.

      3. A01EMT9

        Remove the hog rings and seat cushion cover with pad.

    5. A01EPJD

      for Front Passenger Side:


      1. Disconnect the connector.

      2. Detach the 2 clamps and disconnect the connector holder.

      3. A01ESIS

        Bend the 2 seat frame claws upward.

      4. Detach the hooks and remove the seat cushion cover with pad.

  11. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER


    1. A01EQ2W

      Remove the hog rings and front separate type seat cushion cover from the front separate type seat cushion pad.

  12. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH


    1. A01ER0E

      w/o Climate Control Seat System:

      Cut off the tack pins and remove the front seat cushion heater assembly LH from the front separate type seat cushion cover.

    2. A01EP5O

      w/ Climate Control Seat System:

      Cut off the tack pins and remove the front seat cushion heater assembly LH from the front separate type seat cushion cover.