SEAT VARIABLE CUSHION SWITCH (for Driver Side) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL SEAT VARIABLE CUSHION SWITCH

    A01ERFT

    1. Install the seat variable cushion switch with the 2 screws.

  2. INSTALL FRONT SEAT CUSHION SHIELD LH

    A01EN8S

    1. Attach the 2 wire harness clamps.

    2. Connect the 2 connectors.

    3. A01EPVL

      Attach the 2 claws to install the front seat cushion shield LH together with the front inner No. 1 cushion shield LH.

    4. Install the 3 screws.

    5. A01EQ2T

      Connect the connector.

    6. A01ENHA

      Install the 2 screws.

    7. Connect the 2 rubber band.

  3. INSTALL RECLINING POWER SEAT SWITCH KNOB

    A01EOXD

    1. Attach the 2 claws to install the reclining power seat switch knob.

  4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A01EQ7J

    1. Attach the 2 claws to install the slide and vertical power seat switch knob.

  5. INSTALL FRONT SEAT ASSEMBLY LH

    Click here