SEAT VARIABLE CUSHION SWITCH (for Driver Side) INSPECTION


  1. INSPECT SEAT VARIABLE CUSHION SWITCH (for LHD)

    A01EP37E01

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 (+B) - 5 (CSNF) Front Below 1 Ω
      3 (CSNR) - 4 (E)
      3 (CSNR) - 4 (E) Off
      1 (E) - 5 (CSNF)
      2 (+B) - 3 (CSNR) Rear
      1 (E) - 5 (CSNF)

      If the result is not as specified, replace the seat variable cushion switch.

  2. INSPECT SEAT VARIABLE CUSHION SWITCH (for RHD)

    A01ER62E01

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 (+B) - 3 (CSNF) Front Below 1 Ω
      5 (CSNR) - 1 (E)
      5 (CSNR) - 1 (E) Off
      3 (CSNF) - 4 (E)
      2 (+B) - 5 (CSNR) Rear
      3 (CSNF) - 4 (E)

      If the result is not as specified, replace the seat variable cushion switch.