LUMBAR SWITCH INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL LUMBAR SWITCH

    A01EQC9

    1. Install the lumbar switch with the 2 screws.

  2. INSTALL FRONT SEAT CUSHION SHIELD LH

    A01EN8S

    1. Attach the 2 wire harness clamps.

    2. Connect the 2 connectors.

    3. A01EPVL

      Attach the 2 claws to install the front seat cushion shield LH together with the front inner No. 1 cushion shield LH.

    4. Install the 3 screws.

    5. A01EQ2T

      Connect the connector.

    6. A01ENHA

      Install the 2 screws.

    7. Connect the 2 rubber band.

  3. INSTALL FRONT SEAT CUSHION SHIELD RH (for Front Passenger Side)

    A01EOKG

    1. Connect the connector.

    2. A01EOZD

      Attach the 2 claws to install the front seat cushion shield RH together with the front inner No. 1 cushion shield RH.

    3. Install the 3 screws.

    4. A01EO2Y

      Connect the connector.

    5. A01ES9A

      Install the 2 screws.

    6. Connect the 2 rubber band.

  4. INSTALL RECLINING POWER SEAT SWITCH KNOB

    A01EOXD

    1. Attach the 2 claws to install the reclining power seat switch knob.

  5. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A01EQ7J

    1. Attach the 2 claws to install the slide and vertical power seat switch knob.

  6. INSTALL FRONT SEAT ASSEMBLY LH

    Click here