LUMBAR SWITCH REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY LH

    Click here

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    A01EN8KE02
    Text in Illustration
    *1 Protective Tape

    1. Apply protective tape as shown in the illustration.

    2. Using a screwdriver, detach the 2 claws and remove the slide and vertical power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB

    A01EPMYE02
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT CUSHION SHIELD LH

    A01ENHA

    1. Remove the 2 screws.

    2. Disconnect the 2 rubber bands.

    3. A01EQ2T

      Disconnect the connector.

    4. A01EPVL

      Remove the 3 screws.

    5. Detach the 2 claws and remove the front seat cushion shield LH together with the front inner No. 1 seat cushion shield LH.

    6. A01EN8S

      Detach the 2 wire harness clamps.

    7. Disconnect the 2 connectors.

  5. REMOVE FRONT SEAT CUSHION SHIELD RH (for Front Passenger Side)

    A01ES9A

    1. Remove the 2 screws.

    2. Disconnect the 2 rubber bands.

    3. A01EO2Y

      Disconnect the connector.

    4. A01EOZD

      Remove the 3 screws.

    5. Detach the 2 claws and remove the front seat cushion shield RH together with the front inner No. 1 seat cushion shield RH.

    6. A01EOKG

      Disconnect the connector.

  6. REMOVE LUMBAR SWITCH

    A01EQC9

    1. Remove the 2 screws and lumbar switch.