REAR NO. 1 SEAT ASSEMBLY (for 60/40 Split Seat Type 60 Side) INSTALLATION

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. INSTALL REAR SEAT CUSHION LOCK STRIKER SUB-ASSEMBLY


    1. Install the 4 lock strikers with the 10 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }
      A01ENUAE01

  2. INSTALL REAR NO. 6 AIR DUCT


    1. Install the duct with the 5 screws.

    2. Connect the 2 connectors.

      A01ENHJ

  3. INSTALL FRONT FLOOR CARPET ASSEMBLY


    1. Install the floor carpet.

    2. Install the 2 clips.

  4. INSTALL REAR AIR DUCT GUIDE

    Tech Tips

    Use the same procedures for both sides.


    1. A01ESKY

      Attach the claw to install the guide.

    2. Install the screw.

  5. INSTALL AIR DUCT PLUG


    1. A01EPBP

      Attach the 2 claws to install the plug.

      Tech Tips

      Use the same procedures for both sides.

  6. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

    A01ERFB

    Tech Tips

    When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. Connect the thermistor connector.

    2. Attach the 19 clips and 2 claws to install the quarter trim panel.

    3. Install the clip.

      A01ENWJ
    4. A01EQO3E02

      Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.

    5. A01EOE1

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    6. A01ESN6

      Attach the 3 claws to install the cover.

  7. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

    A01ENK2

    Tech Tips

    When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. Connect the thermistor connector.

    2. Attach the 17 clips and 2 claws to install the quarter trim panel.

    3. Install the clip.

      A01EREO
    4. A01EQD8

      Install the rear No. 2 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    5. A01ES5O

      Attach the 3 claws to install the cover.

    6. A01EPT5

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    7. A01EOL1

      Attach the 3 claws to install the cover.

  8. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    A01EQA6

    1. Attach the 6 clips and 4 claws to install the support plate.

  9. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here

  10. INSTALL REAR DOOR SCUFF PLATE LH

    A01EN6Q

    1. w/o Illumination Type Front Door Scuff Plate:


      1. Attach the 3 claws and 4 clips to install the scuff plate.

      2. Install the screw.

    2. A01ERAD

      w/ Illumination Type Front Door Scuff Plate:


      1. Attach the 3 claws and 4 clips to install the scuff plate.

      2. Install the screw.

  11. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedures described for the LH side.

  12. INSTALL REAR STEP COVER

    Tech Tips

    Use the same procedure to install the step cover on the other side.


    1. A01EQ9D

      w/o Illumination Type Front Door Scuff Plate:

      Attach the 2 claws to install the step cover.

    2. A01EQ94

      w/ Illumination Type Front Door Scuff Plate:

      Attach the 4 claws to install the step cover.

  13. INSTALL REAR NO. 2 SEAT PROTECTOR

    A01EMYNE01

    1. Attach the 10 claws to install the 2 seat protectors.

  14. INSTALL REAR NO. 1 SEAT PROTECTOR

    A01EOBFE01

    1. Attach the 10 claws to install the 2 seat protectors.

  15. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

    Click here

  16. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

    A01ER79E01

    1. Temporarily install the seat assembly with the 4 bolts.

      Note

      Be careful not to damage the vehicle body.

    2. Tighten the bolts in the order shown in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }
    3. A01ESG7

      Connect the connector.

    4. w/ Seat Heater System:

      Connect the connector.

  17. INSTALL REAR NO. 4 SEAT CUSHION HINGE COVER

    A01ESGR

    1. Attach the 2 clips and 2 claws to install the cover.

  18. INSTALL REAR NO. 2 SEAT CUSHION HINGE COVER

    A01ERA4

    1. Attach the 2 clips and 2 claws to install the cover.

  19. INSTALL REAR NO. 5 SEAT CUSHION HINGE COVER


    1. Return the seat to the upright position.

    2. A01ESNI

      Attach the 7 claws to install the cover.

  20. INSTALL REAR NO. 3 SEAT CUSHION HINGE COVER

    A01ERCT

    1. Attach the 6 claws to install the cover.

  21. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  22. CHECK SRS WARNING LIGHT

    Click here

  23. INSPECT REAR NO. 1 SEAT ASSEMBLY LH


    1. w/ Seat Heater System:

      Check the seat heater operation.


      1. Turn the engine switch on (IG).

      2. Turn the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.