DESCRIPTION
This DTC is stored when there is a malfunction in the front seat inner belt buckle switch circuit for the driver side. The seat belt control ECU receives buckle switch condition information from the center airbag sensor via the CAN communication line and controls the pre-crash safety system.
When DTC B2074 is stored, DTC B1655 is also stored.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2074 | Malfunction in the front seat inner belt (buckle switch) circuit. |
|
WIRING DIAGRAM
INSPECTION PROCEDURE
Note
If DTC B1655 is not cleared, DTC B2074 continues to be stored.
PROCEDURE
CHECK DTC (CAN COMMUNICATION SYSTEM)
Use the intelligent tester to check if the CAN communication system is functioning normally Click here for LHD, Click here for RHD).
| Result | Proceed to |
|---|---|
| OK (DTC U0151 is not output) |
A |
| NG (for LHD) |
B |
| NG (for RHD) |
C |
| B |
|
GO TO CAN COMMUNICATION SYSTEM Click here |
| C |
|
GO TO CAN COMMUNICATION SYSTEM Click here |
| A |
|
CHECK DTC (AIRBAG SYSTEM)
Using the intelligent tester, enter the following menus: Body / SRS Airbag / Trouble Code.
Clear the DTCs Click here.
Check for DTCs Click here.
| OK |
|---|
| DTC B1655 is not output. |
| NG |
|
GO TO AIRBAG SYSTEM Click here |
| OK |
|
CHECK DTC (PRE-CRASH SAFETY SYSTEM)
Using the intelligent tester, enter the following menus: Body / Pre-Crash / Trouble Code.
Clear the DTCs Click here.
Check for DTCs Click here.
| Result | Proceed to |
|---|---|
| OK (DTC B2074 is not output) |
A |
| NG (for LHD) |
B |
| NG (for RHD) |
C |
| B |
|
REPLACE SEAT BELT CONTROL ECU Click here |
| C |
|
REPLACE SEAT BELT CONTROL ECU Click here |
| A |
|
USE SIMULATION METHOD TO CHECK Click here