DESCRIPTION
When the master cylinder solenoid (skid control ECU) detects a malfunction in the VSC warning buzzer circuit, a malfunction signal is sent to the seat belt control ECU, and this DTC is stored.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B2070 | While the engine switch is on (IG), the skid control ECU buzzer circuit malfunction signal is received by the seat belt control ECU. |
|
INSPECTION PROCEDURE
PROCEDURE
PERFORM ACTIVE TEST USING INTELLIGENT TESTER (BUZZER)
Using the intelligent tester, enter the following menus: Chassis / ABS/VSC/TRAC / Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Buzzer | Skid control buzzer sounds | OFF or ON | - |
| OK |
|---|
| Skid control buzzer sounds. |
| Result | Proceed to |
|---|---|
| OK (for LHD) |
A |
| OK (for RHD) |
B |
| NG | C |
| B |
|
REPLACE SEAT BELT CONTROL ECU Click here |
| C |
|
GO TO VEHICLE STABILITY CONTROL SYSTEM Click here |
| A |
|
REPLACE SEAT BELT CONTROL ECU Click here