SEAT BELT CONTROL ECU (for RHD) INSTALLATION


  1. INSTALL SEAT BELT CONTROL ECU

    A01ENPZ

    1. Install the ECU with the nut.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    2. Connect the 2 connectors.

  2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL


    1. A01EPKU

      Connect the connector.

    2. Attach the 4 claws to install the finish panel.

    3. Install the 4 bolts.

  3. INSTALL INSTRUMENT PANEL BOX DOOR KNOB


    1. A01EPJO

      Attach the 2 claws to install the knob.

  4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY


    1. A01ERSS

      Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

    2. Attach the 4 claws to install the front passenger side knee airbag.

    3. Install the 4 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

  5. INSTALL COWL SIDE TRIM BOARD LH


    1. A01EQ1Q

      Attach the 2 clips to install the trim board.

    2. Install the cap nut.

  6. INSTALL FRONT DOOR SCUFF PLATE LH

    A01EQ14

    1. w/o Illumination:


      1. Attach the 7 claws and 4 clips to install the scuff plate.

    2. A01EOWQ

      w/ Illumination:


      1. Connect the connector.

      2. Attach the 7 claws and 4 clips to install the scuff plate.

  7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01ESFI

      Connect the connector.

    2. Attach the 4 claws to install the under cover.

  8. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH


    1. A01ER40

      Attach the clip to install the cover.

    2. Install the clip.

  9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A01EO0Q

      Connect the connector.

    2. Attach the 8 claws to install the panel pad.

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  11. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.

  12. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.