FRONT POWER SEAT CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting / Seat.

    5. Select the setting by referring to the table below.

      Display Default Contents Setting
      Seat Travel Distance Normal Allows customizing of the seat movement distance for the power easy access system. OFF / short / Normal

  2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Turn the engine switch on (IG).

    2. Enter the following menus: Setup / Vehicle / Vehicle Settings / Vehicle Customization / Other vehicle settings.

    3. Select the setting by referring to the table below.

      Display Default Contents Setting
      Driver's seat easy exit Partial Allows customization of the seat movement distance for the power easy access system. Full / Partial / Off