AIRBAG CUT-OFF SWITCH INSTALLATION


  1. INSTALL AIRBAG CUT-OFF SWITCH


    1. A01EOKN

      Attach the 2 claws to install the switch.

  2. INSTALL INSTRUMENT SIDE PANEL RH

    A01EPKP

    1. w/o Airbag Cut Off Switch:


      1. Attach the 6 claws to install the side panel.

    2. w/ Airbag Cut Off Switch:


      1. Connect the connector.

      2. Attach the 6 claws to install the side panel.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL ENGINE ROOM SIDE COVER LH

  5. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.