FRONT AIRBAG SENSOR REMOVAL

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE HEADLIGHT ASSEMBLY


    1. Remove the headlight assembly Click here.

  4. REMOVE FRONT AIRBAG SENSOR


    1. A01EOKT

      Remove the nut and front airbag sensor from the body.

    2. Disconnect the connector.