FRONT PASSENGER AIRBAG ASSEMBLY REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE INSTRUMENT PANEL SAFETY PAD


    1. Remove the instrument panel safety pad Click here.

  4. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY


    1. A01ER1B

      Detach the claw and remove the wire.

    2. Disconnect the 2 connectors and remove the instrument panel wire from the front passenger airbag.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

    3. A01EQ80

      Remove the 2 screws.

    4. A01ES2BE01

      Detach the 5 hooks (A).

    5. Detach the 5 hooks (B) and remove the front passenger airbag from the instrument panel.