COMBINATION METER INSTALLATION

Tech Tips


  • Use the same procedures for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. INSTALL COMBINATION METER ASSEMBLY


    1. A01EQUC

      Connect the connector.

    2. A01EOUZ

      Attach the 2 clips.

    3. A01EMYR

      Install the combination meter with the 2 screws.

  2. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01ER8Q

      Attach the 5 claws to install the register.

  3. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01ERR3

      Attach the 4 claws to install the register.

  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01EOED

      Connect the connectors.

    2. Attach the 4 claws to install the finish panel.

    3. A01ENJW

      Attach the 6 claws.

  5. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A01EP96

      Connect the connector.

    2. Attach the 8 claws to install the instrument panel pad.

  6. INSTALL NO. 1 SWITCH HOLE BASE


    1. A01EQ09

      Connect the connectors.

    2. Attach the 5 claws to install the hole base.

  7. INSTALL INSTRUMENT SIDE PANEL LH


    1. A01EQQM

      Attach the 6 claws to install the side panel.

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note


    • Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.