METER / GAUGE SYSTEM SYSTEM DESCRIPTION


  1. METER GAUGE AND WARNING/INDICATOR

    A01ES5PE01
    Meter/Gauge
    Item Details
    Speedometer Based on a signal received from the wheel speed sensor, the skid control ECU calculates the vehicle speed and transmits data to the combination meter (CAN).
    Tachometer The combination meter receives an engine speed signal from the ECM and the gauge needle operates (CAN).
    ODO/TRIP meter

    • The combination meter receives a vehicle speed pulse integration signal from the skid control ECU and the ODO/TRIP meter display operates (CAN).

    • Using the ODO/TRIP switch, the ODO/TRIP meter display changes.
    Fuel receiver gauge The combination meter receives fuel amount information measured by the fuel sender gauge and the gauge needle operates (Direct line).
    Engine coolant temperature receiver gauge The combination meter receives an engine coolant temperature signal from the ECM and the gauge needle operates (CAN).
    Oil pressure receiver gauge The combination meter receives an engine speed signal from the ECM (CAN) and receives an oil pressure sender signal from the oil pressure sender (Direct line). Then the meter measures signals and the gauge needle operates.
    Voltage meter Monitors IG voltage and the gauge needle operates (Direct line).
    Warning/Indicator
    Item Details

    BEAM indicator light

    A01ESIA     		Receives signals from the main body ECU (CAN).

    FRONT FOG indicator light

    A01ERYY     		The indicator turns on when a FRONT FOG illumination command signal is received (CAN).

    REAR FOG indicator light*1

    A01EPWJ     		The indicator turns on when a REAR FOG illumination command signal is received (CAN).

    A/T P warning light

    A01ENFU     		Receives a shift position P signal and transfer neutral signal, and activates the warning light (CAN).

    SRS warning light

    A01ERQY     		Receives malfunction signals from the center airbag sensor (CAN).

    DOOR indicator light

    A01EQPF     		The open door indicator comes on when a signal is received from the main body ECU (CAN).

    Driver side seat belt warning light

    A01ENBL     		Receives driver seat belt signals (unfastened) from the main body ECU (CAN).

    Brake warning light

    A01EN4C

    • Comes on when the parking brake switch is on (CAN).

    • Comes on when the brake fluid level warning switch is on (CAN).

    • Comes on when the vehicle stability control system is malfunctioning.

    CHARGE warning light

    A01EPUS     		Receives malfunction signals from the generator (Direct line).

    4LO indicator light

    A01EOAG     		Receives 4LO indicator light signals from the four wheel drive control ECU (CAN).

    ABS warning light

    A01ES1T     		Receives malfunction signals from the skid control ECU (CAN).

    MIL

    A01EOG3     		Receives malfunction signals from the ECM (Direct line).

    Security warning light

    A01EP0U     		Receives Security warning light signals from the certification ECU (smart key ECU assembly) (Direct line).

    CLEARANCE SONAR indicator light

    A01EN4X

    • Receives CLEARANCE SONAR indicator signals from the parking assist ECU*2 (CAN).

    • Receives CLEARANCE SONAR indicator signals from the clearance warning ECU*3 (CAN).

    ACCESS MODE indicator light

    A01ERMF     		Receives ACCESS MODE indicator signals from the suspension control ECU (CAN).

    AFS OFF indicator light

    A01ENOK     		Receives AFS OFF indicator signals from the headlight swivel ECU (CAN).

    FUEL warning light

    A01EOO6     		Receives fuel empty signals from the fuel sender gauge (Direct line).

    SLIP indicator light

    A01ENFB     		Receives malfunction signals from the skid control ECU (CAN).

    VSC OFF indicator light

    A01ERNE     		Receives VSC OFF indicator turns on signals from the skid control ECU (CAN).

    Cruise control indicator light

    A01EOHX     		Receives a cruise control on signal or malfunction signal from the ECM (CAN).

    TAIL indicator light

    A01EPCZ     		The indicator turns on when a taillight illumination signal is received (CAN).

    Turn signal indicator light (LH/RH)

    A01ENKO     		Receives a turn signal from the FLASHER relay (Direct line).

    RSCA OFF indicator light

    A01EO9D     		Receives an RSCA OFF signal from the center airbag sensor (Direct line).

    Master warning light

    A01ESAR     		Receives warning signals from sensors and ECUs (Direct line and CAN).

    CRAWL indicator light

    A01EO2C     		Receives a CRAWL switch on signal from the skid control ECU (CAN).

    ECT PWR indicator light

    A01ERSV     		Receives an ECT PWR switch ON signal from the ECM (CAN).

    2nd START indicator light

    A01EQF5     		Receives a 2nd START switch ON signal from the ECM (CAN).

    Center differential lock indicator light

    A01ES6C     		Receives a center differential lock switch ON signal from the four wheel drive control ECU (CAN).

    PCS indicator light*4

    A01EPH5     		Receives a PCS indicator light signal from the seat belt control ECU (CAN).

    SPEED LIMIT indicator light*5

    A01EPY1     		The indicator turns on when a vehicle speed signal is received (CAN).

    Automatic high beam indicator light*6

    A01ERLA     		Receives automatic high beam indicator signals from the main body ECU (CAN).

    Multi-terrain select indicator light

    A01EQNO     		Receives a multi-terrain select indicator light signal from the skid control ECU (CAN).

    Turn assist indicator light

    A01ER5B     		Receives a turn assist indicator light signal from the skid control ECU (CAN).

    SET indicator light

    A01EP53     		The indicator turns on when a SET indicator signal is received (CAN).

    Radar cruise control indicator light*7

    A01EQ2X     		The indicator turns on when a radar cruise control indicator signal is received (CAN).

    Eco driving indicator light

    A01ENF9     		Receives the signals necessary for operation from the ECM and the skid control ECU (CAN).

    Tire pressure warning light*8

    A01ER35     		Receives a low tire pressure signal from the tire pressure warning ECU (CAN).
    A/T P shift position indicator Receives a P signal from the ECM (CAN).
    A/T R shift position indicator Receives an R signal from the ECM (CAN).
    A/T N shift position indicator Receives an N signal from the ECM (CAN).
    A/T D shift position indicator Receives a D signal from the ECM (CAN).
    A/T S (1 to 6) shift position indicator Receives a signal (1 to 6) from the ECM (CAN).

    *1: except Middle East

    *2: w/ Side Monitor System

    *3: w/o Side Monitor System

    *4: w/ Pre-Crash Safety System

    *5: for Middle East

    *6: w/ Automatic High Beam System

    *7: w/ Dynamic Radar Cruise Control System

    *8: w/ Tire Pressure Warning System

  2. MULTI-INFORMATION DISPLAY

    When the DISP switch is pressed, the multi-information display is changed between the following: cruise information display and warning display.


    1. Basic Flowchart.

      A01EPFQE02

  3. ECO DRIVING INDICATOR LIGHT SETTING

    Tech Tips


    • The eco driving indicator light can be deactivated by changing the setting.

    • When the eco driving indicator light is deactivated, the indicator and warning light check is not performed.


    1. Setting eco driving indicator light.


      1. Display the odometer screen.

      2. Press and hold the ODO/TRIP switch for five seconds or more to display the settings screen.

      3. After selecting "ON" or "OFF", press and hold the ODO/TRIP switch for 2 seconds or more to exit the settings screen.