LIGHT CONTROL RHEOSTAT INSTALLATION

Tech Tips


  • Use the same procedures for RHD and LHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. INSTALL LIGHT CONTROL RHEOSTAT


    1. A01EQ4W

      Attach the 2 claws to install the rheostat.

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01EOED

      Connect the connectors.

    2. Attach the 4 claws to install the finish panel.

    3. A01ENJW

      Attach the 6 claws.

  3. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. A01EP96

      Connect the connector.

    2. Attach the 8 claws to install the instrument panel pad.

  4. INSTALL NO. 1 SWITCH HOLE BASE


    1. A01EQ09

      Connect the connectors.

    2. Attach the 5 claws to install the hole base.

  5. INSTALL INSTRUMENT SIDE PANEL LH


    1. A01EQQM

      Attach the 6 claws to install the side panel.

  6. ENABLE AUTOAWAY/RETURN FUNCTION


    1. Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter Click here.