ROOM LIGHT (for Front) REMOVAL

Tech Tips

When only replacing the room light bulbs, use the following procedures.


  1. REMOVE MAP LIGHT ASSEMBLY


    1. Using a screwdriver, detach the 2 claws and open the 2 covers.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Remove the 2 screws.

    3. Detach the 2 clips and 2 guides.

    4. Disconnect the 2 connectors and then remove the map light.

      A01EPYHE01

  2. REMOVE MAP LIGHT BULB


    1. A01EOEK

      Turn the 2 map light bulbs in the direction indicated by the arrows and remove them.