ENGINE HOOD COURTESY SWITCH INSPECTION


  1. INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)


    1. for LHD:

      A01EP90E08

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Unlock Below 1 Ω
        1 - 2 Lock 10 kΩ or higher

        If the result is not as specified, replace the hood lock assembly.

    2. for RHD:

      A01ENGSE04

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 Unlock Below 1 Ω
        1 - 2 Lock 10 kΩ or higher

        If the result is not as specified, replace the hood lock assembly.