ELECTRICAL KEY OSCILLATOR (for Rear Floor) INSTALLATION


  1. INSTALL INDOOR ELECTRICAL KEY OSCILLATOR


    1. A01EQ8H

      Attach the 2 claws to install the electrical key oscillator.

    2. Connect the connector.

    3. Install the front floor carpet assembly.

  2. INSTALL REAR NO. 2 SEAT PROTECTOR

    A01EMYNE01

    1. Attach the 10 claws to install the 2 seat protectors.

  3. INSTALL REAR NO. 1 SEAT PROTECTOR

    A01EOBFE01

    1. Attach the 10 claws to install the 2 seat protectors.

  4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH


    1. Install the front quarter trim panel assembly LH Click here.

  5. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH


    1. Install the front quarter trim panel assembly RH Click here.

  6. INSTALL REAR NO. 2 SEAT ASSEMBLY


    1. Install the rear No. 2 seat assembly Click here.

  7. INSTALL REAR NO. 1 SEAT ASSEMBLY RH


    1. Install the rear No. 1 seat assembly RH Click here.

  8. INSTALL REAR NO. 1 SEAT ASSEMBLY LH


    1. Install the rear No. 1 seat assembly LH Click here.

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  10. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.

  11. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.