ELECTRICAL KEY OSCILLATOR (for Outside Luggage Compartment) REMOVAL


  1. REMOVE REAR QUARTER PANEL MUDGUARD LH

    A01ESAQ

    1. Remove the clip.

    2. Using a T30 "TORX" socket, remove the 7 screws and mudguard.

  2. REMOVE REAR QUARTER PANEL MUDGUARD RH

    A01ENPF

    1. Remove the clip.

    2. Using a T30 "TORX" socket, remove the 8 screws and mudguard.

  3. REMOVE PINTLE HOOK ASSEMBLY (w/ Pintle Hook)


    1. A01ERA3E01
      Text in Illustration
      *1 Pintle Hook Bracket
      *2 Eyelet Pintle Hook

      For vehicles with a spare tire installed to the underbody, remove the spare tire.

    2. Remove the 4 nuts.

    3. Remove the 2 bolts, 2 eyelet pintle hooks, pintle hook assembly and pintle hook bracket.

  4. REMOVE REAR NO. 1 BUMPER PLATE


    1. Put protective tape around the rear No. 1 bumper plate.

    2. Detach the 20 claws and remove the rear No. 1 bumper plate.

      A01ERDME01
      Text in Illustration
      *1 Protective Tape - -

  5. REMOVE REAR BUMPER COVER


    1. Put protective tape around the rear bumper cover.

      A01EONOE01
      Text in Illustration
      *1 Protective Tape - -

    2. Open the tail gate and remove the 4 clips.

      A01EO06

    3. Close the tail gate.

    4. Remove the 7 bolts, 6 screws and 2 clips.

      A01EPZL

    5. Detach the 14 claws, disconnect the No. 2 frame wire connector and remove the rear bumper cover.

  6. REMOVE REAR BUMPER ARM BRACKET LH


    1. A01EQGK

      Disconnect the connector.

    2. Remove the 2 bolts and rear bumper arm bracket LH.

  7. REMOVE ELECTRICAL KEY ANTENNA


    1. A01ENWQ

      Remove the 2 screws and antenna.