TELEVISION CAMERA (for Rear) REMOVAL


  1. REMOVE CENTER BACK DOOR GARNISH


    1. A01ERXU

      Detach the 5 clips and 2 claws, and remove the back door garnish.

  2. REMOVE BACK DOOR SIDE GARNISH LH


    1. A01ER4G

      Detach the 3 clips and remove the back door side garnish.

  3. REMOVE BACK DOOR SIDE GARNISH RH


    1. w/o Power Back Door:

      Tech Tips

      Use the same procedures described for the LH side.

    2. w/ Power Back Door:


      1. A01EPSU

        Detach the clip and 2 claws and remove the back door side garnish.

  4. REMOVE BACK DOOR GARNISH


    1. A01EQR4

      Using a screwdriver, detach the 14 clips and remove the back door garnish.

  5. REMOVE BACK DOOR GARNISH RETAINER SUB-ASSEMBLY


    1. A01ESOO

      Using a T30 "TORX" socket wrench, detach the 2 clips and remove the 2 screws and garnish.

    2. Disconnect the connector.

  6. REMOVE REAR TELEVISION CAMERA ASSEMBLY


    1. A01EQJI

      Using a T30 "TORX" socket wrench, remove the 2 screws.

    2. A01ERNH

      Detach the 2 screws grommet and remove the rear television camera assembly.

    3. Disconnect the connector.