CLEARANCE WARNING ECU (w/o Parking Assist Monitor System) INSTALLATION

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.


  1. INSTALL CLEARANCE WARNING ECU

    A01ERVY

    1. Install the clearance warning ECU to the blower unit with the 2 screws.

      Note


      • Avoid any impact to the clearance warning ECU.

      • Do not drop the ECU. If it is dropped, replace it with a new one.

    2. Connect the connector.

  2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. A01ESFI

      Connect the connector.

    2. Attach the 4 claws to install the under cover.