MAYDAY BATTERY INSTALLATION


  1. INSTALL MAYDAY BATTERY


    1. Install the mayday battery to the No. 3 telephone bracket.

    2. Connect the connector.

    3. A01EMZE

      Align the bracket, 2 claws and the nut attachment shaft, and assembly the mayday battery and bracket together.

    4. Install the No. 3 telephone bracket with mayday battery with the nut.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  2. INSTALL TELEMATICS TRANSCEIVER


    1. Install the telematics transceiver with bracket with the 4 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

    2. Connect the 5 connectors.

  3. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. A01EQRB

      Connect the connectors and 3 clamps.

    2. Attach the 6 claws to install the end panel.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. INSTALL ENGINE ROOM SIDE COVER LH


    1. Install the engine room side cover LH with the 7 clips.

  6. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.