TELEMATICS TRANSCEIVER REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER LH


    1. Remove the 7 clips and engine room side cover LH.

      A01EN5SE01

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note


    • w/ Navigation System:

      After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY

    A01ESG6E01

    1. Place protective tape as shown in the illustration.

    2. Using a moulding remover, detach the 6 claws.

    3. Remove the end panel and disconnect the connectors and 3 clamps.

  4. REMOVE TELEMATICS TRANSCEIVER


    1. A01EOOO

      Disconnect the 4 connectors.

    2. Remove the 3 screws and telematics transceiver with bracket.

  5. REMOVE NO. 2 TELEPHONE BRACKET

    A01EQQG

    1. Remove the 2 screws and telephone bracket LH.

    2. A01EP0M

      Remove the 2 screws and telephone bracket RH.